USD Throne Dominic Sagona
The new Sagona UFS Throne comes in nice white colour with also new KIZER Fluid Sagona Pro frame. The Cuff is reworked, so its smaller and its easier to lock in grinds.
The most important thing of this skate is the all new SIFIKA SL 714 liner. The Sifika SL 714 is the first and only liner with an inflatable custom fit system (ICFS) “pump“, meaning you get the perfect custom fit time after time. The ICFS system provides a secure ankle lock, more control and maximum comfort, resulting in an improved skating performance.
On this skate you roll on M1 Sagona Pro wheels in 56mm / 89 A and ABEC 5 bearings.
Availiable end of october.
Thanks el.julio
More details about the skate parts :
up : Kizer Dominic Sagona, as seen at the Ispo 2006.
up : Sifika SL-714 Liner, check the press release here.
Tags: usd
September 22nd, 2006 at 8:33 pm
could make me switch off of xsjados back to usd
September 22nd, 2006 at 8:34 pm
finally a nice looking new skate.
September 22nd, 2006 at 8:36 pm
I have a question–
I was thinking about ditching my heavy K2 schrijns. I skate about 90% vert ramp, and Ive been looking at these thrones for a long time now. These skates look damn good.
Can anyone who knows thrones tell me if they would make a good vert skate (stiff cuff for high speed, good sized soul)
September 22nd, 2006 at 8:36 pm
…looks really nice..but since I already rode a pair of usf-thrones I´ll stick to my xsjados…
September 22nd, 2006 at 8:39 pm
I don´t think they would do great on vert…you know…it´s not even the best park skate…stricktly street and there it is among the best…for vert you might wanna consider salomons or maybe rollerblades…my opinion….
September 22nd, 2006 at 8:48 pm
BEST looking skates i ve evere seen and since ive skated colbergs before i know that they’re fucking AMAZING
September 22nd, 2006 at 8:59 pm
damn ! :D I like those.. maybe something to wish for christmas ? :D and u who have skated usd thrones, how light are they ? compared to razors cult 5’s, cus I tested cult 5s and they were really light, I loved it :D
September 22nd, 2006 at 9:05 pm
how much $ ?
September 22nd, 2006 at 9:05 pm
same shell, different colours [??]
September 22nd, 2006 at 9:18 pm
Aumyi Kawasaki skates ufs thrones on vert, AND SHE IS FUCKING SICK! Rock them man, they’ll treat ya good.
If you want a good vert skate, find the old roces khutis or the Grahlaslkfjsadf or however you spell them. But seriously, USD’s will be fine, the UFS thrones are solid.
September 22nd, 2006 at 9:31 pm
your welcome dude =)
September 22nd, 2006 at 9:34 pm
those are the sexiest usd’s i’ve seen. i love that new liner it looks nice as helll. and that pump system seems good for a great mold.
September 22nd, 2006 at 9:53 pm
how can u lot like them there goddam ugly !!!!!!!!
September 22nd, 2006 at 10:12 pm
i dont really like em
too thin, look like M12s
prob skate real nice tho, nice to see USD making some changes to the shell
September 22nd, 2006 at 10:22 pm
Throw a black cuff on those and they look like my Zamora’s that are in my basement. They new cuff is a great idea… rem lovers should really dig it.
September 22nd, 2006 at 10:50 pm
those look super sick
September 22nd, 2006 at 11:02 pm
good skates. they look wery nice :D and this liner WOW !!
September 22nd, 2006 at 11:11 pm
Too bad Kizer puts up ANOTHER white frame and calls it after a pro. Not that I’ve got a problem with different colors and pro models, but Kizer now has got the Chaz Sands fluid, Team fluid, Sagona fluid and the Horngacher fluid, and except the print and the color of the bolts they’re exactly alike. I expected a bit more innovation here.
September 22nd, 2006 at 11:23 pm
damn, those are nice, now i really need a job
September 22nd, 2006 at 11:32 pm
Jordan Says:
September 22nd, 2006 at 9:53 pm
how can u lot like them there goddam ugly !!!!!!!!
word, theyre awful. they look rly stumpy and short and just ew. nar not for me
September 22nd, 2006 at 11:37 pm
hot! The shell kinda of looks like it is getting a psirus look to them…
September 23rd, 2006 at 12:14 am
@.fx: you forgot the prell fluid…;-)
at all i don´t like those ufsthrones. i don´t like that they have duals and that they are white. black classic thrones like the allstar 2007 are much sexier. and they have a good soulplate. and at least they are black. :p
September 23rd, 2006 at 12:33 am
love Sagona..
if i could skate UFS throne - i will buy them..
but, i have a stupid size.. like 9,5..
so ufs throne 8-9 are too small. 10-11 are too big and ugly, big like Titanic..
so Razors Genesys 8-9 are the best for me…
September 23rd, 2006 at 1:42 am
They’re the best looking USD’s to come out in a while with some ideas actually worth putting into practice. The liner looks amazing. I’m a bit skeptical about sifika liners, but these could prove me wrong
September 23rd, 2006 at 2:15 am
i want it.
September 23rd, 2006 at 2:25 am
Those would look way better in a smaller size, they look huge in that picture
or maybe better when poofed out with the sifika sl-415 liner.
September 23rd, 2006 at 2:46 am
usd never changes there skate designs i see! those are like the louie zamoras!
September 23rd, 2006 at 2:50 am
a v-cut isn’t going to make that stiff ass USD cuff much more flexy
September 23rd, 2006 at 3:16 am
# andreas542 Says:
September 22nd, 2006 at 10:12 pm
i dont really like em
too thin, look like M12s
prob skate real nice tho, nice to see USD making some changes to the shell
They did NOTHING to the shell. Nice to see some one making an intelligent comment on stuff they don’t know about…Again….
September 23rd, 2006 at 3:26 am
other than the ck2 this is the best new skate ive seen all year in my opinion, not to crazy about the fluid frame though, i love kizer but i hated the older versions of that frame
September 23rd, 2006 at 4:14 am
HOTTEST BOOT EVER!
September 23rd, 2006 at 5:07 am
the cuff is cut in the back…alot like the v cut on the remz. thats what dom was makin a big deal about…that and the sifika pump system…thats all they were really concerned with
September 23rd, 2006 at 5:11 am
man sagona always HAS THE BEST SET UP SKATE IT’S LIEK NOT EVEN SHITTY STOCK IT’S LIKE BAD ASS STOCK
HIS LAST throne was black and silver with black fiziks 2nd R wheels and rigen liners i had them they were sick
September 23rd, 2006 at 8:20 am
Well… i’ll just change the cuff and liner in my old Sagonas, and practically i’ll have the new model ;)
September 23rd, 2006 at 8:59 am
September 23rd, 2006 at 2:25 am
Those would look way better in a smaller size, they look huge in that picture
or maybe better when poofed out with the sifika sl-415 liner.
that skate is about a size 8-9…..
September 23rd, 2006 at 2:15 pm
they look absolutely stunning.
i’ve never liked the flat side on the shell but other than that the new thrones are some sharp looking boots.
September 23rd, 2006 at 4:38 pm
Hahahaha, when razorz release a new skate almost all of u r like “aah razors suck, just changing the colours” but let USD do the same, but cut the cuff at the back and WOW, AMAZING??!!??!!?? WTF These r Leonov’s with a white cuff n sifika liners, but I’m sure everyone can see that, so plz stop sayin the same shit about every skate that comes out.
I dont really care, I like USD & Razors. Just funny how full of shit most of u r….. go skate, stop looking for the next excuse to pass an idiotic coment about the colour of every new skate! I promise there will be many more some u like others u dont, skate the ones u like n shut up please.
If u love rollerblading go n do it n support it instead of moaning, who knows it might grow so the companies can afford to bring out a completely new design every year or two.
Tired of whining retards who put more effort in complainin than their skatin.
My 2 cents.
September 23rd, 2006 at 5:09 pm
Geric
your a fagit
everyone has the freedom of speach
again Geric FAGIT
my 2 cents wow this guy is a clown
September 23rd, 2006 at 11:29 pm
Geric is right… i agree with him.. How can’t you, assholes, understand one easy moment:
the new mold, the new shell producing is very E-X-P-E-N-S-I-V-E!!
So to get the money, spent on mold producing, back, and earn some more money, and then spend earnt money on new mold - this process takes a lot of time..
so comments like “this is the same shit diff. color, fuck [any_brand]” are grommetish.. i hate people like you, fuckin moanin bitchy sceptics =)
peace =D
September 23rd, 2006 at 11:32 pm
Stock is right… i agree with him.. How can’t you, assholes, understand one easy moment:
the new mold, the new shell producing is very E-X-P-E-N-S-I-V-E!!
So to get the money, spent on mold producing, back, and earn some more money, and then spend earnt money on new mold - this process takes a lot of time..
so comments like “this is the same shit diff. color, fuck [any_brand]” are grommetish.. i hate people like you, fuckin moanin bitchy sceptics =)
peace =D
September 23rd, 2006 at 11:33 pm
hahha OMG!!! AHAHAHAH
September 24th, 2006 at 7:03 pm
i would just lose the cuff for a classic one….you don’t ride usd’s to have em’ fit lke remz…
September 24th, 2006 at 7:49 pm
according to me usd has fallen off the face of the earth all there new skates are ugly (except the all-star 3)
i like the old throne look better than all their new skates
September 25th, 2006 at 4:01 am
A confrence product featured on RN and not a single comment from Oli Bennet? My eyes must be playing tricks on me…
These skates look tight. I have a friend who says he talked to Dominic’s sister, and she had no idea how good he actually is.
September 25th, 2006 at 8:09 am
likemthose skates a lot.
I like both USD and Razors, but hands down USD offers more skate than any other skate company, Realm, now VII, Classic Throne, UFS Throne, Legacy..any other company offering 5 totally different models?
September 25th, 2006 at 2:08 pm
Yo jim! i was at the imyta i didnt see the post!! haha
Well what can i say about this skate, for me personally the main thing is the liner, because sifikas are already mad comfy so then…the whole air system keeps your foot solid locked in place, but if you dont want the air, you just release it and its a standard sifika liner.
Also everyone on the team is raving about the cut down cuff, i havent tried it though.
And the kizer frame is grey. And its not really about complaining about lack of innovation, when kizer has more frame models than any other brand, PLUS this is the fluid 3, 3rd generation of fluid frame, so we are innovating!
Thanks though, im glad most of you like them…the throne is a strong consistent skate.
September 27th, 2006 at 10:11 pm
cole Says:
September 23rd, 2006 at 5:09 pm
Geric
your a fagit
everyone has the freedom of speach
again Geric FAGIT
my 2 cents wow this guy is a clown
Faggot. Generic. Please use proper spelling when telling some one they are stupid. It helps others take you seriously. More importantly, when some one has a good point, it REALLY makes you look plain dumb.
September 28th, 2006 at 12:46 am
man cant wait tell they come out, i will diffently have a pair…cause the valo tv fashions aint working not enough flex!
October 9th, 2006 at 8:16 pm
OH My. yea im getting those.
October 19th, 2006 at 12:18 am
that is the shit and im going to cop me a pair when they come out mutha fucka.
October 24th, 2006 at 2:31 am
not alor of ppl have usd here were i live evryone has something else so i dunno how thse would look i tryid on a pair of feinbergs a while ago and thats why i wanna get these they should be vout the same right?…and also does the back of the sole plate stick out the back and to the sides?
October 26th, 2006 at 6:27 am
ROCKSANDDIRT
If you buckle up tight I believe they are good. I don’t get much air in the pipe, only a few feet.
I skate Vans in california, I can backside royale nice. I have the old dustin latimer thrones. They have good support. Like I said, just buckle up and it should be good.