Posts Tagged ‘custom ride system’

Create Originals, CRS Frames: Now Shipping

Sunday, August 23rd, 2015

Create Originals, CRS Frames: Now Shipping

More infos on the Create Originals Facebook Post.
Kickstarter Backer Shipping Request:!kickstarter/c24y5

Create Originals: This update is devastating…

Monday, February 16th, 2015

Create Originals, CRS Frames

After going through all of the stainless steel spacer sliders and rigid spacers one by one for quality and removing the bad ones we thought we were all set.

However, Hakeem then found a catastrophic error. Almost all of the axles are slightly too thick and although they will fit through the spacers they will not fit through the bearings. This could be from either the electroplating being too thick or a problem with the steel axle itself.

Either way, it is a huge set-back that stops us from delivering the frames at this time. We are extremely upset about it.

I can’t express in words to you how devastated we are by this. We have obviously contacted the manufacturer and this is the returned message:


Create Originals: CRS Frames Update

Thursday, February 5th, 2015

Create Originals, CRS Frames

Wow. I have wanted to write this message for a VERY long time. The CRS frames are at Boston Logan Airport.

We have now received word that they have cleared customs and are awaiting pick up. What happens now… We are going to need to get a truck and then head down to a warehouse near the airport (door to door shipping would have been an extra $700). Then we will have to settle up with all of the customs fees and what ever other bullshit fees they throw at us. Then load them all up.


Create Originals, CRS Frames: Project Update

Wednesday, January 29th, 2014

Create Originals, CRS Frames

First off we’d like to apologize for the lateness of this new update. We have been diligently coordinating with our factory to get the last few details of the latest parts we received worked out. […]

As you can see we have received the latest samples for the CRS frame chassis, urethane spacers, stainless steel spacer sliders, rigid spacers, and axles (photos). These new parts have taken longer than we had hoped to arrive so unfortunately there has been additional time added to our completion estimation. […]

One of the new delay factors is that we will have to wait until the Chinese New Years vacation is over to proceed, as our factory and all its workers will be on break for the next 3 weeks. This is the only time off they get during the entire year so we are waiting patiently till they get back to continue with the process of getting our project under wraps. We expect the factory workers to be back by the middle of February so we expect production to begin by the end of that month. This will push the completion and ship date of the frames till late Spring. […] – The CRS Development Team.

Read the full update on

Create Originals, CRS Frames: Project Update

Wednesday, November 20th, 2013

New CRS Spacer Samples & Updated Delivery Date.

Create Originals, CRS Frames

Hello all our loyal backers and friends alike. We have just received the latest versions of the metal and urethane spacers. These are upgraded as the metal spacer is stronger and the urethane is a more durable formula.

We’ll be testing them out with the final frames samples, we received previously, to assure they are good to go. We have noticed some QC (quality control) issues that we have to address with these latest samples.

That being the finish of the metal spacers not being as smooth as we’d like. This may or may not effect the long term wear of the metal spacers and corresponding frame spacer slot.

Create Originals, CRS Frames

As you can see in these new images the metal spacers and urethane spacers are now separate from each other. The main reason for this change is that it dramatically decreases the replacement costs for the user when deciding to upgrade their spacers. Which, as all parts we use when blading, will need to be replaced from time to time.

Most importantly the user wont have to pay for additional metal when they simply want to try a different hardness urethane. It facilitates the ability to try out different CRS setups and allows us to economically produce more options that much more readily. This cost savings is applied to the metal spacer parts also, as we plan to introduce color plated versions in the future.

We are finalizing the attachment methods for the urethane to the metal spacer so that the replacement/ upgrading process is as simple as possible. We are unfortunately still waiting for the final axle samples to arrive.

This setback along with the metal spacer QC issue will now postpone our new approximate delivery date of the end of this year. It is not what we were hoping for and we understand that it is disappointing. Our new estimation will be for February 2014. This will be just under 1 year since our project started.

We sincerely apologize for not meeting our time frame, we expected these samples to be the last before production. We are undoubtably thankful and lucky that our backers truly want this project to succeed. We plan on adding some extra goodies in the packages to make sure those who pledged will have something for their wait.

Once we get what should be the final sample round of metal parts we’ll be able to push the button and get your frames produced. That process will take 30 days. We will then expedite the shipping to us so we can get them to you as soon as possible.

Those who selected clothing rewards will still receive them before the Holidays. Anyone who has not submitted their backer surveys, please do so. If you have changed your address or the reward options you’d like please email us the info so we can update our files.

Thank you for your support. – The Create Development Team.

Post on

Create Originals, CRS Frames: Project Delayed

Saturday, October 19th, 2013

Create Originals, Custom Ride System Frames

As you can see we do now have the CRS frame core chassis completed in the final design, but we are still working on fine tuning the last details.

We unfortunately have to announce that the project has been delayed and we won’t be able to ship out the frames in this month of October. We greatly apologize for not being able to meet the proposed deadline and are working diligently to get things completed.

Some of the issues causing the delay is that we have switched manufacturers throughout the process and are working on getting the final parts from them just right. Namely getting the production process and quality of the urethane spacers & metal parts optimized. We hope to have the frames completed and out to you before the years end as that is our current goal. […]

Full press release on Kickstarter.

Create Originals, Custom Ride System Frames

Create Original: CRS Frame Final Renderings

Wednesday, June 12th, 2013

Greetings to all our CRS Frame backers around the world. It has been a while since the last update but we are excited to now show you the final renderings and drawings of the CRS frame chassis going into production.Create Original.

Create Original: CRS Frame Final Renderings

More infos & pictures of the Custom Ride System on Kickstarter.

Create Originals: 2 Days, Custom Ride System Frame Testing with Mark Wojda (2013)

Tuesday, April 16th, 2013

Create Originals Am Team rider Mark Wojda tested out our new Custom Ride System prototype frames on the rough streets of Boston.

Check out what he did in 2 days on the new patent pending interchangeable ride suspension frames.

Learn more about our CRS Frames via our project page, where you can become a backer and help get these revolutionary frames on the market.

Create Originals, Custom Ride System Frame

Kickstarter: $30,000 goal reached. 10 days to go.

Create Originals: Custom Ride System (CRS) Inline Skate Frame (Kickstarter)

Wednesday, March 6th, 2013

Feb 6, 2013. Update: $16,030 pledged of $30,000 goal. 51 days to go.
+ New video: Team Reactions to the Create Originals CRS Frames.

Create Originals: Custom Ride System (CRS) Inline Skate Frame

Team Reactions to the Create Originals CRS Frames
Featuring Alex Broskow, Austin Paz & Mark Wojda.

Custom Ride System Frame Kickstarter Project

Create Originals: Custom Ride System (CRS) Inline Skate Frame

Introducing, the Worlds First & Only Custom Ride System (CRS) Inline Skate Frame. Featuring Customizable Shock Absorbing Capabilities.

Check the Create Originals Kickstarter.
$30,000 goal. Funding ends: Apr 26, 2013.