Comments on: More Broken Able Frames

By: skateboarder4life

skateboarder4life — Mon, 12 Mar 2007 02:33:27 +0000

fuck that ,i am just going to go skateboarding !

By: tum

tum — Sat, 23 Dec 2006 20:44:18 +0000

sorry, i know that all frames break but to be honest i know kids who ride salamon st frames which cost a fiver and they dont break after 5 stairs. i ride gc. there pretty decent.

By: scottishroller

scottishroller — Fri, 08 Dec 2006 23:33:21 +0000

its a bammer cause they are so nice but now i dont wanna buy them

i cant trust a frame that will break this easy

By: oki-san

oki-san — Fri, 08 Dec 2006 18:48:01 +0000

no shit man. frames break no matter what kind they are. there not meant to be industrucible.

By: DANIELSON

DANIELSON — Fri, 08 Dec 2006 04:22:13 +0000

word^^

By: oneone1onezero0

oneone1onezero0 — Thu, 07 Dec 2006 03:53:00 +0000

able tried something new with freestyle frames. they broke. mooks broke left and right the first time they came out, so did the cores. how come there’s no hate-wagon for shadow or 50/50? that’s what happens when new shit comes out. as more successive batches are released, the amount of defects decreases and the product improves. It happens with cars, it happens with software, it happens with skates(parts). first airplane stayed in the air for 28 seconds, so imagine where we’d be if people had that same mentality back then.

v word: naga as in “naga please”

By: Piz

Piz — Thu, 07 Dec 2006 02:52:30 +0000

Freestyle frames break a lot faster than flat or anti because of weight distribution…..that is why 50/50 came out with the Core. To prevent that. Ur all a bunch of conformists…..just because a few able frames break, doesnt mean you shouldnt support them. They are a ROLLERBLADING company trying to supply us with the shit we need to rollerblade. GO FUCKIN SKATEBOARD if you dont like it. It seems all these stupid ass people are always out for whats popular. Rollerblading was popular in 95. Then I bet 25% of people that said they were rollerbladers went on to skateboarding because that got MORE popular. This month the popular thing to do is bomb on able frames. Fuck yaaaall.

By: Mr. St. Ours

Mr. St. Ours — Thu, 07 Dec 2006 01:33:16 +0000

I should dispell some of the rumors on here so everyone knows what’s up. First off, if you are one of the few who broke the frames, contact your retailer and let them know immediately so they can send back the frames and you can be re imbursed if it falls under the warrenty. It seems that the few people who have broken them have done so to the freestyle frames. If you do not ride them with the center axles, the plastics will flex unnaturally to the design of them, this causing weak points. Also the breaks may be a manufacturer flaw created when the molds are heated up causing “slugs” which create weak points. These are usually test frames that should NOT be sent to us by the manufacturer but can once in awhile slip through the cracks and get to us and in turn, to you. Like all new designs you will come into some hitches but we’ve tested these thoroughly with many many types of riders of different size and style. I assure you the problems are fixed. You have to remember that products are’nt made to be indestructible but to withold to damage and wear. Skateboarders break decks and trucks once in awhile, it is a reality of their sport. We need to accept that too, after all, if we made something that never broke (really fucking cool, I know haha) it would sell once then there would be no use for the company afterwards. Ride the frames properly and if you have any problems with them, please let your retailer know so we can solve the issue. Thanks guys!

St. Ours

By: narly retard

narly retard — Wed, 06 Dec 2006 17:35:47 +0000

dude that sucks my freind broke those frams to. they brake eassier then mooks

By: Pellit

Pellit — Wed, 06 Dec 2006 16:37:46 +0000

haha at you n00bs saying ‘glad i ride on GC’- GC are absolute shite and snap like twigs

By: Thomas

Thomas — Wed, 06 Dec 2006 07:24:05 +0000

ok you fucking idiots you have to ride the frame with those screws in the middle. despite the fact they may slow you up on grinds they do hold the frame together, ride any freestyle frame without those screw the same result will occur. able is just fine. they had a faulty batch but now thier fine, just fine.

By: dXL.

dXL. — Wed, 06 Dec 2006 05:41:23 +0000

yo guys. if you keep posting this stuff, it’s going to spread to other grommets that need to improve on better frames and they’ll post that thier frames broke too. soon we’ll all live off stock frames. don’t make this worse than it really is.
thanks for explaining colemanation.

dXL.

By: oki-san

oki-san — Wed, 06 Dec 2006 03:25:26 +0000

they should just fix the problem. i personally thinkg these are some of the better looking frames out right now and id definatly skate them if they were stronger, btw to those who say “OMG SHOW ME A BROKEN GC!” i have a pair of snapped bullets from my old razor, right inbetween the 3rd and 4th wheel.

By: stephen A

stephen A — Wed, 06 Dec 2006 02:27:28 +0000

they are still good frames cuz i no some 1 who broke fiziks the first day that frame was just a false and he should get new 1s

By: sean wicks

sean wicks — Tue, 05 Dec 2006 19:21:36 +0000

i love the framesi thik there the best the just need to make them stronger like the old ables