Comments on: M1 Urethane: Brian Aragon Wheel

By: manwithaplan

manwithaplan — Wed, 12 Nov 2008 11:57:16 +0000

M1 are the worst wheels i have ever skated.. chunk and fall to bits in minutes….
If they are making them at the same factory i would put a pretty penny on them being complete terd

By: ballin

ballin — Tue, 11 Nov 2008 17:07:44 +0000

how would they have not changed you stupid butch

By: yes

yes — Tue, 11 Nov 2008 06:26:49 +0000

d master is so right

By: D-Master

D-Master — Tue, 11 Nov 2008 05:40:36 +0000

Wally, you are so stupid. So you spend a whole gigantic paragraph saying how this “new urethane” is so amazing awesomer and betterer. Yet, you haven’t even proven to us (whether through research, graphs, or bona fide R&D) how your new wheels are even better than the next urethane wheels already on the shelves around the world. You and your hollow bullsh-t “guarantees” and your lame “this will be the best urethane/wheels you have ridden” is a line done and said time and again by countless other hopeless wheel companies.

Prove to us your new urethane is any better than the competition and maybe I’ll consider opening my wallet and throwing $5 at your dumbass to try your wheels.

By: also

also — Tue, 11 Nov 2008 01:52:32 +0000

i dont think they changed

By: also

also — Tue, 11 Nov 2008 01:51:18 +0000

i dont think they changed much

By: jeff brown

jeff brown — Tue, 11 Nov 2008 01:50:19 +0000

too bad m1s suck. =(

By: -

Mon, 10 Nov 2008 22:57:42 +0000

By: b.ballog

b.ballog — Mon, 10 Nov 2008 20:48:14 +0000

It’s a bold promise. I really hope they are the real deal because the current wheel market is really poor. Myself or my friends have destroyed Heat and 4×4 wheels in a matter of weeks just skating park. Eulogy has been the only wheel I’ve had last almost 3 months now. I skate park about 3 times a week, mostly bowls and carving, and street once or twice.

By: juancs

juancs — Mon, 10 Nov 2008 16:52:05 +0000

haha this sounds like ther are selling detergent to housewives

By: DarthRoller

DarthRoller — Mon, 10 Nov 2008 16:19:02 +0000

I hope these promises are true.

I’d like to see more wheels tested in places like Eastern Europe and the UK, where we don’t have perfect spots everywhere OR have smooth tarmac between all our spots.

Wheels need to be tested more on rough gravel, cobbles, poorlay laid tarmac etc. for all of us who live outside the US and have to roll from the spot with the shit run-up to the spot with the handrail which has a lamp-post and cobbles at the bottom to the spot beside the slippy leaves to the spot with the broken glass, etc. etc. etc.

By: MJ

MJ — Mon, 10 Nov 2008 16:04:47 +0000

in my experience, m1 wheels have always been the worst ive ever skated, there very fast and smooth but that doesnt last long, within 3 skates, you will have them cracks running round them, then a few more sessions and chunks fall out. and i skate outdoor park and a bit of street if that makes a differece?

By: one [not the mag]

one [not the mag] — Mon, 10 Nov 2008 14:27:20 +0000

The best wheels I have ever ridden in my sixteen years are eulogy. The key is to let them sit in a cool dark place for at least six months. This allows them to harden, or cure. The old cozmos were good but we abuse our wheels much more now. M1 wheels, sorry wally, have only been good for park. They tend to wear very quickly on street esp. if you skate spot to spot most of the time. Eulogys last for me on average six months and M1 last maybe 3 if I’m lucky.

By: Wally

Wally — Mon, 10 Nov 2008 14:19:25 +0000

The factory that we make our wheels at recently updated their machinery to the newest technology available. The machinery can handle chemical that other manufactuers can’t. Those chemical are the best ones. Franky and I have been designing this compound for about a year and were just waiting for the machinery to be ready. They came out way better that we imagined and are better than anything else made guaranteed!

By: ballin

ballin — Mon, 10 Nov 2008 14:05:37 +0000

Ima get me some

By: Jake

Jake — Mon, 10 Nov 2008 12:45:13 +0000

Sounds exciting!

I wonder if anyone knows any specific reason why they are better than every other wheel? Are they made in a whole new different factory do you think?

Almost all wheels are rubbish at the moment, with the exception of the new UC pro range. We need more good urethane! Cozmo has still never been matched! (but even the new Cozmos aint so good)

locoskates.com

By: gav

gav — Mon, 10 Nov 2008 11:45:03 +0000

nothing will ever beat any of the original cozmo’s

truth hurts

By: chemnitzDaniel

chemnitzDaniel — Mon, 10 Nov 2008 11:21:50 +0000

same promises every time! first let us ordinary skaters try these hehe