Finger Skates

finger skates

They’re made of a combination of materials. The main materials are Rec Skate Key chains that I bought from a convenience store in Barbados. Then I also used thin and very long popsicle sticks, craft foam, and special bread bag clips that slides very nice and they seem to use it a lot here in Barbados.

I was able to get it to look espceially good by tweaking them with tools such as a knife, scissors, razor, krazy glue (really strong tacky glue or glue gun glue which is “Stony” Jonathon’s trademark), paper for certain details, electric tape for smooth variances on colours (That’s how I got the green on the valos and the red lining on the liner of the Rachards) and printed coloured graphics to give better precision on details like on the side details of the Murda 2s.

Q: How long did it take?

A: Wow…uhhh it took me on average after I got better with my next models perhaps 2 to four days. my first took me a week. Even when i was done with them I still had to do finishing touches overtime to get them to look closer and closer to the actual models.

They’re made of a combination of materials. The main materials are Rec Skate Key chains that I bought from a convenience store in Barbados. Then I also used thin and very long popsicle sticks, craft foam, and special bread bag clips that slides very nice and they seem to use it a lot here in Barbados. I was able to get it to look espceially good by tweaking them with tools such as a knife, scissors, razor, krazy glue (really strong tacky glue or glue gun glue which is “Stony” Jonathon’s trademark), paper for certain details, electric tape for smooth variances on colours (That’s how I got the green on the valos and the red lining on the liner of the Rachards) and printed coloured graphics to give better precision on details like on the side details of the Murda 2s. [...]

Check the Finger Rollerblades Topic here

Support Rollernews: make your purchases on Amazon via this link. Thanks!

Tags:

81 Responses to “Finger Skates”

  1. Longinus Says:

    fantastically pointless

  2. Daniel Nielsen Says:

    Cool.

  3. Dom Says:

    why would youtake the time to do this though? go out and skate properly

  4. obi Says:

    that’s funny, i want it

  5. Kenny Says:

    I think it’s amazing. I like handcrafting myself and I respect your work and skills. amazing

  6. LVRolla Says:

    Yeah it`s probably pointless but it`s remarkable how close those look to real skates… this guy has some skills!

  7. julius Says:

    rrrespect!!!!

  8. tyler Says:

    where are the valos?

  9. red Says:

    those deshis are just like the real ones..

  10. Ching Says:

    They look sick!!!!….but you’ve got too much time on your hands. lol

  11. qcsky Says:

    man!! you did a good job.
    V*E*R*Y* GOOD JOB

  12. steven Says:

    are you selling one of theese because i’m searching for a while for fingerskates send me a messages : psycho_roller_f7@hotmail.com

  13. Jeffblute Says:

    You got to be fucking kiding me…..

  14. Kris Says:

    Stony’s were cooler
    Stony’s were cooler
    Stony’s were cooler
    Stony’s were cooler
    Stony’s were cooler
    Stony’s were cooler
    Stony’s were cooler
    Stony’s were cooler
    Stony’s were cooler
    Stony’s were cooler
    Stony’s were cooler
    Stony’s were cooler
    Stony’s were cooler
    Stony’s were cooler

  15. Drew Says:

    U Have Way To Much Time On Ure Hands If U Can Spend 4 Days To A Week Building Skates For Ur Fingers But It Is Pretty Cool How U Got All Those Details – If U Build Some Haffey 04′s W/White Soul Plates A Grey BS Plate And Some GC Hi-Lo Frames That Are Black W/A Grey H-Block Then Ill Be Rly Impressed

  16. flanegan Says:

    nice~~~!

  17. jumo Says:

    OMg mine are so bad !!! but they realy work fine … maybe a mini video in french topic later …

  18. alkobrosex Says:

    do you no my friand mister brian aragon ?

  19. finish skater yo man chicago Says:

    :D ha ha. pretty nice yeah

  20. david Says:

    haHA I want them

  21. Cody Says:

    haha dude. i love the little deshi’s

    you sould make some little valo’s for me =]

  22. Mitch Says:

    hey if your selling those i’ll definitely buy a pair of the valo’s send me an e-mail if you are mitchstapp@verizon.net

  23. aiden Says:

    where can you buy these finger skates

  24. aiden Says:

    yyou should try and make a pair of xjsado frames for them

  25. stephan Says:

    Please sell one of them to me!!!!! If you are going to sell them email me at rizeagainst13@yahoo.com

  26. justin Says:

    I will buy them!!!! email irollerblade1313@hotmail.com

  27. Tyler Says:

    if ur selling them i want a pair, shoot me an email, sk8man172@aol.com

  28. zach Says:

    yo those are hot dude if ur selling them email me devillsgomoo2000@yahoo.com

  29. zach Says:

    devilsgomoo2000@yahoo.com*

  30. mozafoka Says:

    the frames are made with whant kind of material???? please answer me I want make ones!

  31. andrew Says:

    can u guys put up instructions to make the deshis
    also make some remz

  32. Mark Says:

    where do you buy that skate ????

  33. rob Says:

    i wanna pair, how much you sellin em for, email me, rob_williams123@msn.com

  34. Zak Says:

    hey dude if your selling these ill buy um ive been looking for some time now

    zakdiedyesterday@netscape.net

  35. AaronAaron Says:

    do you plan on selling any of those…im still in high school so those would be great duing test week or some lame ass class that im totaly half assing to pass…only a hard core skater would rock those …i hella want the murda 2s and remz…get back to me on it.

    razer_blader209@hotmail.com

  36. Vepe Says:

    I want to know how u make these frames??

  37. cam Says:

    u should put up instructions how to make them

  38. cam Says:

    if you do email them this way

  39. andrew Says:

    they are wicked if use have a pair or selling them can u please email me

  40. adspoikja Says:

    where can i buy a pair of these?

  41. meeeeee Says:

    could u plz put a step by step guide on here with resorces we can buy in the uk?

  42. rob Says:

    yea, instructions would be nice, i could make sum of my own then =D
    they would be great for boring journeys n shit, plus i could pout my tech deck ramps to use again =D, the boards kinda sucked ass =(

  43. steven Says:

    you can make them also for me, and if you can that how duration goes that to cost.

  44. noel Says:

    how do you make them ?

  45. joe filip Says:

    these finger skates r cool man u could make a good deal of money off this idea.would u be able to make me a pair or i can just buy the ones u have made.if u could make me 1 it would like them to be usd thrones with the 2 piece soul.i will pay the cost for them.hit me up on my email it is hippie374@aol.com

  46. TOMMY Says:

    HEYYY IVE BEEN WANTING TO HAVE SOME FOR A REALLY LONG TIME, IF YOU COULD MAKE SOME MURDA 3′S GIMME AN EMAIL AT TKIDROX@hotmail.com

  47. luke Says:

    i will buy some from you if you could make trs moralas email me at ltr5657@yahoo.com

  48. James Work Says:

    Hey, I love these finger skates do you sell Roces and Razor finger skates even if you don’t I would like to buy a bunch of pairs for me and my friend Chris Sanches could you email me back with an answer ASAP at my email adress pwork@cox.net please!!!! Thanks James and Chris from Barrington, Rhode Island!!!!

  49. Chris Sanchas Says:

    Hey, If anyone knows were to get aggressive finger skates or even the person who builds them please e-mail me at pwork@cox.net Thx!!!!!!!!!!!!!!!!!

  50. Gabriela Hernandez Says:

    omg thats so kool please can u sell them to me please my email is hotcatcher18@aol.com.

  51. Brandon Says:

    wut is wrong wit da backslide plate
    on da murda 2′s??

  52. erica Says:

    freakin awsome how did you make them? and wear did you get the idea

  53. erica Says:

    your skates are the best can you sale some on ebay please i will buy them for 20$

  54. erica Says:

    very cool skates ther awsome can i buy some from you

  55. erica Says:

    are they for sale

  56. erica Says:

    do you know any body else that has some i will buy them

  57. erica Says:

    come on please sell them or show me how to make them pleasssssssssssssssssssssssssssssssssssssss!!!!!!!!!!!!

  58. erica Says:

    nice skates i want some i think i would have a lot more fun with those than tech decks come on please sell them

  59. erica Says:

    awsome i like them a lot i will buy 2 pairs of them just name the price i will get one for me and one for my cousin just wright back and tell me your price please.

  60. erica Says:

    really good on the detail

  61. erica Says:

    wear did you buy the skate rec key chain?

  62. blake Says:

    hey ive been serching for a pair of those and if ur selling im willing to pay 50$ for a pair just shoot any email

  63. cody Says:

    those r sweet i will buy them just pick da price

  64. Lee Says:

    hey man these are SICK i want to buy any of them email me almost anyprice leearco@yahoo.com

  65. dominique Says:

    email me at dominiquethomas22@yahoo.com soon as i can get them|why because i been looking for those for a year so plz give me those finger rollerblades.

  66. dominique Says:

    also i want the green wheels with the black or the blue wheels with the white email me at dominiquethomas22@yahoo.com plz plz i want those skates.

  67. Keegan Says:

    PLEEEEASE start selling these or at least made a tutorial or something

    email me even if the answer is no

    keegster25@wowway.com

  68. jez saddington Says:

    i will buy them £15
    email me at jez.saddingtonbull@gmail.com

  69. josh Says:

    those r awesome and ive been looking for them for a long time and if u are selling any plz contact me at rllrbldr249@aol.com

  70. vonsin Says:

    hey man those skates are sick and dont listen to the haters could you plz sell me some?

  71. vonsin Says:

    hey man those skates are sick and dont listen to the haters could you plz sell me some? respond to sk8erdude53@yahoo.com

  72. Remz 0803 rdr Says:

    Hey these are sick.would you sell me some, I pay BIG buck 4 those.

  73. Remz 0803 rdr Says:

    ARE YOU THERE??????????????????????????????

  74. Remz 0803 rdr Says:

    HELLO HELLo HELlo HEllo Hello hello

  75. q-jam4536 Says:

    dude those are sick can i have a pair?

  76. Alex Says:

    I want a pair of those…:) e-mail me at respir.alcool@yahoo.com

  77. max Says:

    what material you used for the finger skates answer me please call maxpenni@web.de

  78. bob Says:

    how the hell do you make the damn skates

  79. rere Says:

    hi guys, where i can get the finger skate? it’s hard to find in my country. anyone can help me to orders??

  80. malachi singleton Says:

    where can i buy it

  81. AOR Finger Skates Says:

    Hi we sell finger skates backed by all the best skaters you have a choice of over 20+ models check our store at http://www.AORFINGERSKATES.COM